Q&A with Mr. T #7 "How do I make the team?"

Adam asked: Q: "Sir Tanaka how do I make the East Kingdom Unbelted Team?" A: Great Question! The answer is both simple and complex. It's simply a matter of going to the unbelted practices and fighting well enough to make the team. It's a bit more complex based on the nature that our Warlord changes with the War reigns so each warlord may have a differing agenda, or format for selection. My suggestion is to fight well, fight ALOT, and Fight at all the unbelted practices.... Cheers,T

Sword fighting in Northern NJ - Thoughts on making rattan swords...by diagnosing problems with them

Galfrid showed me his broadsword and asked me to diagnose the how and the why his swords were brooming so fast.

Now Galfrid fights 2-3 times a week at a couple high level practices...so the brooming of his swords could easily be diagnosed as heavy use, but the main fractures in his rattan ran 90 degrees off of his striking surfaces!?.

Now Galfrid is primarily a right handed Weapon and Shield fighter, and we're looking at his broadsword. it's a 32-34 inch weapon with a Stainless Steel Wire baskethilt that he fabricated (really nice work btw). He keeps his handles thick to offset breakage by the wire baskethilt (common problem) and only shapes them a little bit. The blank stock for the sword was probably just shy of 1.5 inches in the 35-37 MM range. He didn't plank this sword. (plane down the sides so they're flat).

So I took a serious look at his tape bruising. "Tape Bruising" is the damage done to the cosmetic tape on SCA swords. By examining this bruising, I diagnose a good bit about the users technique.

The bruising was substantial as was the surface pulping of the rattan. There was the aforementioned crack running east - west of the striking surfaces. On closer examination, the inside side of the sword was really mashed. This is a indication of incomplete rolling of the wrist during wrapshots especially since the area of the pulping was the last 4-5 inches of the blade toward the foilable.

I suggested that he go to thicker rattan stock, 40 mm perhaps, and to plane down the blank and shape the handle so that the sword doesn't "swim" on his wrap shots.

Galfrid said he's going to give it a shot...

Makes me want to get down to the shop and make some weapons...